Yaesu FT-100D User Manual

Scanning Operation
PROGRAMMABLE MEMORY SCAN (PMS) OPERATION
To limit scanning (or tuning) within a particular frequency range, you can use the Program-
mable Memory Scanning
(PMS) feature, which utilizes twenty special-purpose memories
("PGM 001" ~ "PGM 020"). The PMS feature is especially useful in helping you to
observe any operating sub-band limits which apply to your Amateur license class.
PMS setup is simple to complete. First, store the upper and lower frequency limits ofthe
range in a consecutive pair of PMS memories (i.e., "PGM 001" & "PGM 002", "PGM
003" & "PGM 004", etc.). For example, "PGM 003" might contain the lower edge and
"PGM 004" the upper. Next recall the first memory of the pair that hold the range you
want to scan or tune, then turn the
MAIN DIAL knob or pressing the SELECT knob
momentarily to activate memory tuning (the
"MT" icon will appear on the display). Tuning
and scanning are now within the limits
of the selected PMS memory pair, keeping opera-
tion inside this programmed range.
Example: Limit tuning & scanning to the 17-m band
I. Press the [VFO/MR] key, as necessary, to recall the VFO mode. Tune to the low edge
of the 17-m band (18.068 MHz) and select the desired mode (probably USB or CW).
2.
Press the [FUNC] key, as necessary, to recall Operating Function Row 2 [V>M, M>V,
RPT, REV].
3. Press the [A](V>M) key momentarily, then tum the SELECT knob to select memory
channel
"PGM 001."
4. Press and hold in the [A](V>M) key for Y:z second to write the VFO frequency (18.068
MHz) into "PGM 001."
5. Tune to the high edge of the 17-m band (18.168 MHz), leaving the mode unchanged.
6. Press the [A](V>M) key momentarily, then tum the SELECT knob to select the memory
channel
"PGM 002."
7. Press and hold in the [A](V>M) key for Y:z second to write the VFO frequency (18.168
MHz) into
"PGM 002."
8. Recall memory channel "PGM 001 ", and tum the MAIN DIAL knob clockwise or
pressing the
SELECT knob momentarily to activate memory tuning.
9. Tuning and scanning are now limited to the 18.068 ~ 18.168-MHz range until you
press the
[VFO/MR] key to return to memory or VFO operation.
80
FT-/oO MICRO MOBILE OPERATING MANUAL

Yaesu FT-100D Specifications

General

Product type	Portable CB radio
Product color	Black
Housing material	-
Display type	LCD
Output power	100 W
AM band range	5.2 - 18 kHz
FM band range	15 - 25 MHz
Frequency range	0.1 - 961 MHz
Channels quantity	50 channels
Compatible products	ATAS-120\\tActive-Tuning Antenna System FC-20\\tAutomatic Antenna Tuner YSK-100\\tSeparation Kit XF-117CN\\t300Hz CW Filter MH-36B6JS\\tDTMF Microphone FTS-27\\tCTCSS Tone Decoder Unit
Microphone included	Yes
Input voltage	13.8 V

Weight and Dimensions

Depth	205 mm
Width	160 mm
Height	54 mm