ABB MicroFlex e150 User Manual

114 Start-up
 Other tools and windows
Remember, for help on each tool press F1 to display the help file, then navigate to the
Mint WorkBench book. Inside this is the Toolbox book.
• Edit & Debug Tool
This tool provides a work area including
the Command window and Output
window. The Command window can be
used to send immediate Mint commands
to the MicroFlex e150. If you tried the
test moves in Performing test moves -
continuous jog on page 109 or Performing test moves - relative positional move
on page 110, then you have already used Edit & Debug mode.
Press Ctrl+N to open a Mint programming window (except models ..EINA..).
• Scope Tool
Displays the capture screen. This screen is also shown when the Fine-tuning tool
is selected.
• Digital I/O Allows you to configure the
active states and special assignments
for the digital inputs and outputs.
For example, a general purpose
digital input can be configured as an
optional ‘drive enable input’, which
must be active to enable the drive;
see pages 63 and 65 - 68.
If a digital input is to be used as a
home switch input, see Using a digital
input as a home switch input
(optional) on page 63 for important
details.

ABB MicroFlex e150 Specifications

General

Brand	ABB
Model	MicroFlex e150
Category	Control Unit
Language	English