Agilent Technologies 83620B User Manual

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FM On/Off DC
Programming Codes
SCPI:
FM:SENSitivity < num > [freq/V sux][MAXimum j MINimum
FM:COUPling AC
FM:STATeON j OFF j 1 j 0
Analyzer: NONE
See Also
4
MOD
5 , CONNECTORS
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
FM On/Off Ext
Function Group
4
MOD
5
Menu Map
4
Description
This softkey (Option 002 only) activates the frequency mo dulation
mo de for an external source. The FM source is connected to the FM
mo dulation connector. The FM sensitivity function is active. It is
factory preset to 10 MHz/V. Use the numeric entry keys, arrowkeys,
or rotary knob to change the sensitivity to 100 kHz/V or 1 MHz/V.
When external FM is in eect, the RF output is frequency mo dulated
with a rate and depth set by the external source. The FM coupling
is controlled by the following softkeys:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FM Coupling 100kHz
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FM Coupling DC . The FM coupling defaults to 100 kHz. This is A
C
coupling for FM rates of 100 kHz or greater. F
or mo dulation rates
below 100 kHz, choose DC-coupled FM.
An asterisk next to the key lab el indicates that external FM is active
and FM is displayed on the message line.
For swept signal generators without Option 002, see
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FM On/Off AC
and
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FM On/Off DC .
Programming Codes
SCPI:
FM:SOURce EXTernal
FM:SENSitivity < num > [freq sux/V] j MAXimum j MINimum
FM:STATeON j OFF
Analyzer: FM1 function on, FM0 function o
See Also
4
MOD
5 , also see \FM" and \Mo dulation".
F-14 Operating and Programming Reference

Agilent Technologies 83620B Specifications

General

Brand	Agilent Technologies
Model	83620B
Category	Inverter
Language	English