Agilent Technologies 83620B User Manual

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Up/Down Power
Function Group
POWER
Menu Map
5
Description
This softkey activates the power step size function. It can b e set
from 0.01 to 20 dB. In this mo de, power is stepped by the up/down
arrow keys. An asterisk next to the key lab el indicates this feature is
active.
Programming Codes
SCPI:
POWer:STEP[:INCrement] < num > [DB] or
MAXimum j MINimum
POWer:STEP:AUTO ON j OFF j 1 j 0
Analyzer: SP or SHPL and UP or DOWN
See Also
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Up/Dn Size CW ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Up/Dn Size Swept
\Programming Typical Measurements" in Chapter 1
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Up/Dn Size CW
Function Group
FREQUENCY
Menu Map
2
Description
This softkey lets you set the frequency step size for the CW
frequency mo de. The step size may b e set from 1 Hz to
10 GHz. The factory preset size is 100 MHz. CW frequency is
incremented/decremented by pressing the up/down arrow keys.
If an underline cursor appears under a digit in the entry display, then
the value will be mo died by the up/down arrow keys or the rotary
knob. The increment/decrement size in this case is the underlined
digit by the power of 10.
If the up/down function is on (asterisk next to key lab el) and the
cursor is not under one of the active entry area digits, then frequency
value is changed by the up/down size using either the up/down arrow
keys or the rotary knob.
U-2 Operating and Programming Reference

Agilent Technologies 83620B Specifications

General

Brand	Agilent Technologies
Model	83620B
Category	Inverter
Language	English