Agilent Technologies 83620B User Manual

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Up/Dn Size Swept
Programming Codes
SCPI: FREQuency:STEP[:INCR] < num > [freq sux] or
MAXimum j MINimum
Analyzer: SF or SHCF < num > [Hz j Kz j Mz j Gz]
See Also
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Manual Sweep ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Sweep Mode Step ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Up/Dn Size Swept
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Up/Dn Size Swept
Function Group
FREQUENCY
Menu Map
2
Description
This softkey sets the frequency step size in the swept frequency step
mo de. The step size may be set from 1 Hz to 10 GHz. The factory
preset step size is 100 MHz. Step size values are entered using the
entry area.
If an underline cursor appears under a digit in the en
try display, then
the value will be mo died by the up/down arrow keys or the rotary
knob. The increment/decrement size in this case is the underlined
digit by the power of 10.
If the up/down function is on (asterisk next to key lab el) and the
cursor is not under one of the active en
try area digits, then frequency
value is changed by the up/down size using either the up/down arrow
keys or the rotary knob.
Programming Codes
SCPI: FREQuency:STEP[:INCR] < num > [freq sux] or
MAXimum j MINimum
Analyzer: SF or SHCF < num > [Hz j Kz j Mz j Gz]
See Also
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Up/Dn Size CW
Operating and Programming Reference U-3

Agilent Technologies 83620B Specifications

General

Brand	Agilent Technologies
Model	83620B
Category	Inverter
Language	English