Agilent Technologies 83620B User Manual

Features not available in one of the language mo des are marked by
a horizontal line in the corresp onding column. In the interest of
brevity all SCPI commands have b een listed in their most concise
form. For a complete and comprehensive listing of the swept signal
generator SCPI commands refer to \SCPI COMMAND SUMMARY"
in Chapter 2. For explanations of SCPI refer to \Getting Started
Programming" in Chapter 1.
Numeric Suffixes
Numeric suxes consist of 2 or 3-character co des that terminate and
scale an asso ciated value. The numeric suxes for network analyzer
language on the 8360 B-Series and the HP/Agilent 8340/8341 are
identical. Table 3-8 lists the 8360 B-Series suxes. The default unit
for eachtyp e of sux is shown in b old type.
Table 3-8. Numeric Suffixes
Sux
Type
Network Analyzer
Language
SCPI
Frequency HZ j KZ j MZ j GZ HZ j KHZ j MHZ j GHZ
Power Level DB DBM j W j MW j UW
Power Ratio DB DB
Time SC j MS S j MS j US j NS j PS
Status Bytes
There are two separate and distinct status structures within
the 8360 B-Series dep ending on the GPIB language selected.
When network analyzer language is selected, the status structure
utilized is structurally and syntactically the same as on the
HP/Agilent 8340/8341. This greatly enhances programming
compatibility between existing HP/Agilent 8340/8341 programs
and network analyzer programs converted or written for the
8360 B-Series.
In the SCPI language mo de, the status structure is dened b
y the
SCPI status system. All SCPI instruments implement status registers
in the same fashion.
For more information on the status registers, refer to \ANALYZER
STATUS REGISTER" and \SCPI STATUS REGISTER
STRUCTURE" in Chapter 2.
3-24 Installation

Agilent Technologies 83620B Specifications

General

Brand	Agilent Technologies
Model	83620B
Category	Inverter
Language	English