Agilent Technologies 83620B User Manual

Installation Procedure
1. Refer to Figure 3-3. Remove handle trim strips.
2. Remove four screws p er side.
3. Using the screws provided, attach the rack mount anges to the
outside of the handles.
4. Remove the side straps and end caps.
5. Remove the b ottom and back feet and the tilt stands.
Figure 3-3. Removing the Side Straps and Feet
Installation 3-11

Agilent Technologies 83620B Specifications

General

Brand	Agilent Technologies
Model	83620B
Category	Inverter
Language	English