Rockwell Automation Publication 1783-UM003G-EN-P - December 2012 51
Chapter
3
Manage the Switch via the Device Manager
Web Interface
Introduction
After you complete Express Setup, you can manage the switch by using the Device
Manager Web interface (supplied with the switch).
On all dialog boxes accessible from the Configure menu, when you click Submit,
changes are applied to the switch and stored on the CompactFlash card. If you
exit the Device Manager Web interface without clicking Submit, your changes are
not applied.
Topic Page
Access the Device Manager Web Interface 52
Front Panel View and Status Indicators 53
Assign Port Roles 57
Update Switch IP Information 61
Configure VLANs 63
Configure SNMP 67
Configure EtherChannels 69
Configure DHCP Persistence 71
Synchronize the Switch with Other Devices via PTP 78
Configure REP Segments 83
Configure IP Addresses 86
Enable Static Routing 86
Configure Port Mirroring 88
Dashboard Dialog Box 89
Port Status 95
Port Statistics 96
Alert Log 98
CIP Status 99
Upgrade the Switch Firmware 101
To Next Page
Loading...
Need help?
General
