Allen-Bradley Stratix 8300 User Manual

Rockwell Automation Publication 1783-UM003G-EN-P - December 2012 87
Manage the Switch via the Device Manager Web Interface Chapter 3
Route Across Ports
You can also route information across ports that are on different VLANs within
the Stratix 8300 switch.
To route across ports, use the IP Addresses dialog box to enable static routing.
1. Choose Configure > IP Addresses from the Device Manager Web
interface.
2. Select the box for each port to be routed.
3. Assign a unique IP address and subnet mask.
4. Check Enable Routing.
Check Enable Routing.

Allen-Bradley Stratix 8300 Specifications

General

Brand	Allen-Bradley
Model	Stratix 8300
Category	Switch
Language	English