Allen-Bradley Stratix 8300 User Manual

Rockwell Automation Publication 1783-UM003G-EN-P - December 2012 61
Manage the Switch via the Device Manager Web Interface Chapter 3
Configure Ports to Use QuickConnect Technology
EtherNet/IP QuickConnect technology enables EtherNet/IP devices to quickly
power up and join an EtherNet/IP network. The Stratix 8000 and Stratix 8300
switches can be an integral part of a network configuration that uses
QuickConnect technology. To use the switches in a network that supports
QuickConnect technology, you must apply certain port settings to the switch.
For information on configuring the switch and applying port settings for
QuickConnect technology, refer to the Ethernet QuickConnect Application
Technique, publication ENET-AT001
.
Update Switch IP
Information
The network settings enable the switch to operate with its standard default
settings and to be managed through the Device Manager Web interface. These
settings were set during the initial setup. Change these settings if you want to
move the switch to a different management VLAN or to a different network.
Use the Express Setup dialog box to update the switch IP information. To display
this dialog box, choose Configure>Express Setup from the Device Manager Web
interface menu.

Allen-Bradley Stratix 8300 Specifications

General

Brand	Allen-Bradley
Model	Stratix 8300
Category	Switch
Language	English