98 Rockwell Automation Publication 1783-UM003G-EN-P - December 2012
Chapter 3 Manage the Switch via the Device Manager Web Interface
Alert Log
The Alert Log dialog box displays switch problems that happened since the log
was last cleared. The problems are issues that should be or have already been
solved.
To display the Alert Log, choose Monitor>Alert Log from the Device Manager
Web interface menu.
Click Clear Log to acknowledge that you have read the alerts. Clicking Clear Log
does not resolve the issue.
Use the Diagnostic Test dialog box to generate a diagnostics report to resolve the
issues detected by the switch.
The Alert Log includes this information.
Use the Alert Log with the Status field on the Front Panel view.
Alert Log
Issue Description
Severity Level A single-digit code (0…5) that reflects the severity of the problem. The lower the number, the more serious the condition and
the need to take action.
Emergency (0)—The switch is unusable.
Alert (1)—The switch requires immediate action.
Critical (2)—The switch has a critical condition.
Error (3)—The switch has an error condition.
Warning (4)—The switch has a warning condition.
Notifications (5)—The switch is operating normally but has a significant condition.
Description The description of the problem, including the port on which the problem was detected.
Time Stamp The date and time of the refresh cycle during which the problem was last detected.
To Next Page
Loading...
Need help?
General
