EasyManuals Logo

Canon XF300 User Manual

Canon XF300
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #108 background imageLoading...
Page #108 background image
Recording
108
3
Special Recording Modes
3 Press the START/STOP button to begin recording.
The camcorder automatically records at the set frame rate.
The tally lamps illuminate.
[S&F STBY] changes to [N S&F REC] while recording.
4 Press the START/STOP button again to stop recording.
The camcorder records the clip.
The tally lamps go out and [S&F STBY] appears at the top of the
screen.
NOTES
You can use only one special recording mode at a time. In addition,
slow & fast motion mode cannot be used with double slot recording.
While recording, you cannot change the shooting frame rate.
For lower shooting frame rates, it may take approximately 1 second to
stop recording.
Slow & fast motion mode will be deactivated if the special recording
mode is changed or turned off. It will be deactivated also if you change
the video configuration.
The time code advances while video is recorded. If the running mode of
the time code (0 84) is set to [Free Run] or the time code is input from
an external source (b only), the running mode will switch to [Rec
Run] during special recording mode. When special recording mode is
deactivated, the running mode will return to its previous setting.
b During special recording mode, the time code signal will not
be output from the TIME CODE terminal or HD/SD SDI terminal.
When the bit rate is set to 50 Mbps (0 53) during slow motion
recording, relay recording is not available.
Pre-recording Mode
When pre-recording mode is activated, the camcorder starts recording
continuously into a temporary memory of approximately 3 seconds so
when you press the START/STOP button, the clip will contain also
approximately 3 seconds of video and audio recorded before you
pressed the button.
1 Open the [Special Rec] submenu.
[J Other Functions] [Special Rec]
2 Select [Pre Rec] and then press SET.
[PRE REC STBY] appears at the top of the screen.
3 Press the START/STOP button to begin recording.
The tally lamps illuminate.
[PRE REC STBY] changes to [N PRE REC] while recording.
[J Other Functions]
[
Special Rec]
[Off]
COPY
Downloaded From VideoCamera-Manual.com Manuals

Table of Contents

Other manuals for Canon XF300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon XF300 and is the answer not in the manual?

Canon XF300 Specifications

General IconGeneral
Filter size82 mm
Digital zoom1.5 x
Optical zoom18 x
Image stabilizerYes
Focal length range4.1 - 73.8 mm
Focal length (35mm film equivalent)29.3 - 527.4 mm
Sensor typeCMOS
Total megapixels2.37 MP
Optical sensor size1/3 \
Video out1
Flash memory32768 MB
Aperture range (F-F)1.6 - 22
Horizontal resolution1000 lines
Power consumption (typical)9 W
Viewfinder resolution1550000 pixels
Viewfinder screen size0.57 \
Display diagonal4 \
ISO sensitivityAuto
Normal focusing range0.02 - 1 m
Maximum frame rate50 fps
Maximum video resolution1920 x 1080 pixels
Image formats supportedJPG
Audio formats supportedMP3
Camera shutter speed1/18 - 1/2000 s
Microphone inNo
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Compatible memory cardsSD, SDHC
Product colorBlack
Video recording time1.2 h
Operating temperature (T-T)-5 - 45 °C
Weight and Dimensions IconWeight and Dimensions
Depth180 mm
Width394 mm
Height192 mm
Weight2700 g

Related product manuals