Customization
116
4
Custom Picture Settings
Editing a Custom Picture File’s Settings
1 After selecting a file, select [I X Edit File] and then press SET.
2 Select a setting and then press SET.
3 Change the setting to the desired level.
• Refer to the table Available Custom Picture Settings (0 119) for
details on the various settings.
• Repeat steps 2 and 3 for other settings, as necessary.
• To return the file to its default settings, select [Reset], select [OK] and
then press SET.
4 Press the CUSTOM PICT. button to exit the custom picture
menu.
NOTES
• To return the current file's settings to the default values, select
[I Reset] and then press SET. Next, select [OK] and then press SET.
Renaming Custom Picture Files
1 After selecting a file, open the [Rename] submenu.
[I X Edit File] [Rename]
• A screen appears that displays the current file name with an orange
selection frame on the first character.
2 Select an alphanumeric character or symbol then move (A) to
the next field.
• Change the rest of the name in the same way.
3 Select [Set] and then press SET.
4 Press the CUSTOM PICT. button to exit the custom picture menu.
Preset Custom Picture Files
By default, the custom picture files in the camcorder in file slots [C7] to
[C9] are protected. Remove the protection (0 117) to edit the file. The
following describes when to use the preset files.
[C7 VIDEO.C]: For playing back video on consumer flat-panel
displays.
[C8 CINE.V]: For achieving a cinema-like picture on TV monitors,
such as when creating TV programs that require a
cinema-like effect.
[C9 CINE.F]: When combined with [Cine 2] (under [Gamma]) and
[Cine 2] (under [Color Matrix] [Select]), creates a
cinema-like effect different from that of [C8 CINE.V].
[I X Edit File]
[Rename]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
