179
Additional Information
8
Displaying the Status Screens
Displaying the Status S creens
You can use the status screens to check the camcorder’s various recording- and playback-related settings. You
can also output the status screens on an external monitor.
1 Press the STATUS button.
• The status screen most recently displayed will appear unless you
turned off the camcorder or changed the operating mode. In such
case, the [Camera] status screen appears in mode and the
[Buttons / Remote] status screen appears in mode.
2 Push the joystick up/down or use the SELECT dial to scroll through
the status screens.
3 When you are finished, press the STATUS button again to exit the
status screens.
• Alternatively, you can press the MENU or CUSTOM PICT. button. Doing
so will exit the status screen and open the respective menu.
* Does not appear in the [Photos] index screen.
Operating modes:
Status screen Description 0
[Camera] Displays settings related to recording, such as gain, focus and zoom. N – 180
[Buttons / Remote] Allows you to verify the current function of each assignable button
and whether the wireless controller is on.
N N 180
[Audio]* Displays settings related to audio. N N 181
[Media] Displays information about the recording media. N N 181
[Video] Displays the settings for the video terminals and which special
recording mode is in effect.
N N 182
[User Memo] Displays the user memo that will be recorded with clips. N – 182
[Battery / Hour Meter] Allows you to check the remaining battery time, battery life and how
long the camcorder has been in operation.
N N 183
[X Data 1/3]
Displays the settings for the custom picture file that will be
embedded into clips.
N –
183
[X Data 2/3] 184
[X Data 3/3] 184