Customization
128
4
Saving and Loading Camera Settings
Savi ng and Loa ding Camer a Settings
After you adjust custom picture settings and settings in the various
menus, you can save those settings on an SD card. You can load those
settings at a later date or on another XF305 or XF300 camcorder so that
you can use that camcorder in that same exact way.
Saving Camera Settings to an SD Card
1 Open the [Save To b] submenu.
[J Other Functions] [Transfer Menu/X] [Save To b]
2 Select [Menu] or [Menu+X] and then press SET.
• Selecting [Menu] will save menu settings and [Menu+X] will save
menu and custom picture settings.
3 Select [OK] and press SET.
• The current settings are saved to the SD card. If the SD card already
has camera settings on it, they will be overwritten.
4 When the confirmation screen appears, press SET.
Loading Camera Settings from an SD Card
1 Open the [Load From b] submenu.
[J Other Functions] [Transfer Menu/X] [Load From b]
2 Select [Menu] or [Menu+X] and then press SET.
• Selecting [Menu] will load menu settings and [Menu+X] will load
menu and custom picture settings.
3 Select [OK] and press SET.
• After the camcorder’s current settings are replaced with the settings
saved on the SD card, the screen will turn black momentarily and the
camcorder will restart.
NOTES
• The SD card includes a text file that lists the camera settings. You can
check the settings by using a USB card reader to access the SD card
on a computer. In the [CAMSET] folder, open the file “CAMSET.TXT”.
• The camera settings can be used with other XF305 and XF300
camcorders.
• When loading camera settings from an SD card, even protected
custom picture settings in the camcorder will be replaced.
Operating modes:
[J Other Functions]
[Transfer Menu/X]
[Save To b]
[J Other Functions]
[Transfer Menu/X]
[Load From b]