Cisco 5510 - ASA SSL / IPsec VPN Edition User Manual

1-16
Cisco ASA Series CLI Configuration Guide
Chapter 1 Managing Software and Configurations
Backing Up Configurations or Other Files
PORT=Data0
VLAN=1
IMAGE=f1/asa851-smp-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=2
RETRY=20
Step 6 Ping the TFTP server by entering the ping server command.
rommon #8> ping server
Sending 20, 100-byte ICMP Echoes to server 172.16.171.125, timeout is 2 seconds:
Success rate is 100 percent (20/20)
Step 7 Load the software image by entering the tftp command.
rommon #9> tftp
Clearing EOBC receive queue ...
cmostime_set = 1
ROMMON Variable Settings:
ADDRESS=172.16.145.149
SERVER=172.16.171.125
GATEWAY=172.16.145.129
PORT=Data0
VLAN=1
IMAGE=f1/asa851-smp-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=2
RETRY=20
tftp f1/asa851-smp-k8.bin@172.16.171.125 via 172.16.145.129
Starting download. Press ESC to abort.
After the software image is successfully loaded, the ASASM automatically exits ROMMON mode.
Note You must download the image to the system flash separately after ROMMON boot is complete;
booting the module into ROMMON mode does not preserve the system image across reloads.
Step 8 To verify that the correct software image has been loaded into the ASASM, check the version by entering
the following command:
hostname# show version
Backing Up Configurations or Other Files
• Backing up the Single Mode Configuration or Multiple Mode System Configuration, page 1-17
• Backing Up a Context Configuration or Other File in Flash Memory, page 1-17
• Backing Up a Context Configuration within a Context, page 1-18
• Copying the Configuration from the Terminal Display, page 1-18
• Backing Up Additional Files Using the Export and Import Commands, page 1-18
• Using a Script to Back Up and Restore Files, page 1-19

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English