1-47
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring OSPF
Feature History for OSPF
Feature History for OSPF
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for OSPF
Feature Name Platform Releases Feature Information
OSPF Support 7.0(1) Support was added for route data, authentication, and redistribution and
monitoring of routing information using the Open Shortest Path First (OSPF)
routing protocol.
We introduced the following command: route ospf
Dynamic Routing in
Multiple Context
Mode
9.0(1) OSPFv2 routing is supported in multiple context mode.
Clustering For OSPFv2 and OSPFv3, bulk synchronization, route synchronization, and
Layer 2 load balancing are supported in the clustering environment.
We introduced or modified the following commands: show route cluster, show
ipv6 route cluster, debug route cluster, router-id cluster-pool.
OSPFv3 Support for
IPv6
OSPFv3 routing is supported for IPv6.
We introduced or modified the following commands: ipv6 ospf, ipv6 ospf area,
ipv6 ospf cost, ipv6 ospf database-filter all out, ipv6 ospf dead-interval,
ipv6 ospf encryption, ipv6 ospf hello-interval, ipv6 ospf mtu-ignore, ipv6
ospf neighbor, ipv6 ospf network, ipv6 ospf flood-reduction, ipv6 ospf
priority, ipv6 ospf retransmit-interval, ipv6 ospf transmit-delay, ipv6
router ospf, ipv6 router ospf area, ipv6 router ospf default, ipv6 router ospf
default-information, ipv6 router ospf distance, ipv6 router ospf exit, ipv6
router ospf ignore, ipv6 router ospf log-adjacency-changes, ipv6 router
ospf no, ipv6 router ospf passive-interface, ipv6 router ospf redistribute,
ipv6 router ospf router-id, ipv6 router ospf summary-prefix, ipv6 router
ospf timers, area encryption, area range, area stub, area nssa, area
virtual-link, default, default-information originate, distance, ignore lsa
mospf, log-adjacency-changes, redistribute, router-id, summary-prefix,
timers lsa arrival, timers pacing flood, timers pacing lsa-group, timers
pacing retransmission, timers throttle, show ipv6 ospf, show ipv6 ospf
border-routers, show ipv6 ospf database, show ipv6 ospf events, show ipv6
ospf flood-list, show ipv6 ospf graceful-restart, show ipv6 ospf interface,
show ipv6 ospf neighbor, show ipv6 ospf request-list, show ipv6 ospf
retransmission-list, show ipv6 ospf statistic, show ipv6 ospf
summary-prefix, show ipv6 ospf timers, show ipv6 ospf traffic, show ipv6
ospf virtual-links, show ospf, show running-config ipv6 router, clear ipv6
ospf, clear configure ipv6 router, debug ospfv3, ipv6 ospf neighbor.