1-7
Cisco ASA Series CLI Configuration Guide
Chapter 1 Defining Route Maps
Feature History for Route Maps
Feature History for Route Maps
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for Route Maps
Feature Name
Platform
Releases Feature Information
Route maps 7.0(1) We introduced this feature.
We introduced the following command: route-map.
Enhanced support for static and dynamic route
maps
8.0(2) Enhanced support for dynamic and static route maps was
added.
Support for Stateful Failover of dynamic
routing protocols (EIGRP, OSPF, and RIP) and
debugging of general routing-related operations
8.4(1) We introduced the following commands: debug route,
show debug route.
We modified the following command: show route.
Dynamic Routing in Multiple Context Mode 9.0(1) Route maps are supported in multiple context mode.