1-49
Cisco ASA Series CLI Configuration Guide
Chapter 1 Managing Feature Licenses
Monitoring Licenses
Monitoring the Shared License
To monitor the shared license, enter one of the following commands.
Examples
The following is sample output from the show shared license command on the license participant:
hostname> show shared license
Primary License Server : 10.3.32.20
Version : 1
Status : Inactive
Shared license utilization:
SSLVPN:
Total for network : 5000
Available : 5000
Utilized : 0
This device:
Platform limit : 250
Current usage : 0
High usage : 0
Messages Tx/Rx/Error:
Registration : 0 / 0 / 0
Get : 0 / 0 / 0
Release : 0 / 0 / 0
Transfer : 0 / 0 / 0
The following is sample output from the show shared license detail command on the license server:
hostname> show shared license detail
Backup License Server Info:
Device ID : ABCD
Address : 10.1.1.2
Registered : NO
HA peer ID : EFGH
Registered : NO
Messages Tx/Rx/Error:
Hello : 0 / 0 / 0
Sync : 0 / 0 / 0
Update : 0 / 0 / 0
Shared license utilization:
SSLVPN:
Total for network : 500
Command Purpose
show shared license [detail | client
[hostname] | backup]
Shows shared license statistics. Optional keywords ar available only for
the licensing server: the detail keyword shows statistics per participant.
To limit the display to one participant, use the client keyword. The
backup keyword shows information about the backup server.
To clear the shared license statistics, enter the clear shared license
command.
show activation-key
Shows the licenses installed on the ASA. The show version command
also shows license information.
show vpn-sessiondb
Shows license information about VPN sessions.