3-71
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 3 Configuration
Event Notification Setup
Handle Station Events as Severity Level
You use this setting to set a severity level for Station Alerts. Use the pull-down
menu to choose one of the sixteen severity levels. Table 3-1 on page 3-67 lists the
severity levels in the menu. The *silent* option is not available for station events,
however.
Maximum memory reserved for Detailed Event Trace Buffer (bytes)
Enter the number of bytes reserved for the Detailed Event Trace Buffer. The
Detailed Event Trace Buffer is a tool for tracing the contents of packets between
specified stations on your network.
After you reserve space for the trace buffer, browse to a device’s Station page and
select the Alert checkboxes in the To Station and From Station columns. See the
“Browsing to Network Devices” section on page 5-2 for instructions on opening
a device’s Station page.
Download Detailed Event Trace Buffer
Use these links to view Headers Only or All Data in the detailed trace buffer. The
number of bytes saved per packet is controlled on the Association Table Advanced
Setup page.
If your browser is Netscape Communicator, click the links with your left mouse
button to view the trace data. Click the links with your right mouse button and
select Save Link As to save the data in a file.
Clear Alert Statistics
Click this button to reset the alert tallies to 0.
Purge Trace Buffer
Click this button to delete the packet traces from the Event Trace Buffer.
To Next Page
Loading...
Need help?
General
