Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP User Manual

9-37
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 9 Diagnostics and Troubleshooting
Checking the Top Panel Indicators
A portion of the All Data packet trace file might look like this example:
===Beginning of AP_North Detailed Trace Log===
04:46:14 +17174.384615 Station Alert:
00:01:64:43:ef:41[Aironet]00:40:96:40:6f:e6[Aironet]00:40:96:40:6f:e6 0x0000
00 4a 40 81 00 40 96 40 6f e6 00 01 64 43 ef 41 01 7f 00 04 5f 00 00 40 96 40 6f e6 00 00
00 00 00 00 00 00 00 00 0a 54 8b a4 00 00 44 57 49 4c 4c 2d 49 42 4d 2d 57 32 4b 00 00 00
00 00 00 00 00 00 |.J@..@.@o...dC.A..._..@.@o............T....JCOOL-IBM-W2K.........|
04:47:37 + 83.326923 Station Alert:
00:01:64:43:ef:41[Aironet]00:40:96:40:6f:e6[Aironet]00:40:96:36:14:5a 0x0000
00 4a 40 81 00 40 96 36 14 5a 00 01 64 43 ef 41 01 7f 00 04 5f 00 00 40 96 40 6f e6 00 00
00 00 00 00 00 00 00 00 0a 54 8b a4 00 00 44 57 49 4c 4c 2d 49 42 4d 2d 57 32 4b 00 00 00
00 00 00 00 00 00 |.J@..@.6.Z..dC.A..._..@.@o............T....JCOOL-IBM-W2K.........|
===End of AP_North Detailed Trace Log===
Packets Displayed on the CLI
To view packets displayed on the access point CLI, follow the instructions in the
“Using the Command-Line Interface” section on page 2-5 to open the CLI. The
access point displays the packets at the bottom of the screen.
Checking the Top Panel Indicators
If your access point is not communicating, check the three indicators on the top
panel. The indicators report the unit’s status. Figure 9-9 shows the indicators on
top of the access point. Table 9-3 lists the meanings of the indicator signals.

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Specifications

General

Brand	Cisco
Model	AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP
Category	Wireless Access Point
Language	English