Chapter 3 Configuration
Radio Configuration
3-30
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Follow this link path to reach the AP Radio Advanced page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Advanced in the AP Radio row under Network
Ports.
Settings on the AP Radio Advanced Page
The AP Radio Advanced page contains the following settings:
• Requested Status
• Packet Forwarding
• Default Multicast Address Filters
• Maximum Multicast Packets/Second
• Radio Cell Role
• Maximum Number of Associations
• Use Aironet Extensions
• Require Use of Radio Firmware x.xx
• Ethernet Encapsulation Transform
• Enhanced MIC verification for WEP
• Temporal Key Integrity Protocol
• Broadcast WEP Key rotation interval (sec)
• Bridge Spacing
• Accept Authentication Types
• Require EAP
• Default Unicast Address Filter
• Specified Access Points
• Radio Modulation
• Radio Preamble