Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP User Manual

2-7
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 2 Using the Management Interfaces
Using the Command-Line Interface
Setting Up the Terminal Emulator
Follow these steps to set up the terminal emulator:
Step 1 Open a terminal emulator.
Step 2 Enter these settings for the connection:
• Bits per second (baud rate): 9600
• Data bits: 8
• Parity: none
• Stop bits: 1
• Flow control: none
Step 3 Press = to display the home page of the access point. If the access point has not
been configured before, the Express Setup page appears as the home page. If the
access point is already configured, the Summary Status page appears as the home
page.
Changing Settings with the CLI
The CLI pages use consistent techniques to present and save configuration
information. Table 2-2 lists the functions that appear on most CLI pages.
Table 2-2 Common Functions on CLI Pages
Function Description
Press Enter
three times
Refreshes the page and cancel changes to settings.
Ctrl-R Refreshes the page and cancel changes to settings.
= Returns to the home page without applying changes.
:back Moves back one page without applying changes.

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Specifications

General

Brand	Cisco
Model	AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP
Category	Wireless Access Point
Language	English