1-5
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 1 Overview
Network Configuration Examples
Repeater Unit that Extends Wireless Range
An access point can be configured as a stand-alone repeater to extend the range of
your infrastructure or to overcome an obstacle that blocks radio communication.
The repeater forwards traffic between wireless users and the wired LAN by
sending packets to either another repeater or to an access point connected to the
wired LAN. The data is sent through the route that provides the best performance
for the client. Figure 1-2 shows an access point acting as a repeater. Consult the
“Setting Up a Repeater Access Point” section on page 8-1 for instructions on
setting up an access point as a repeater.
Note Non-Cisco client devices might have difficulty communicating with repeater
access points.
Figure 1-2 Access Point as Repeater
Access Point
(Root Unit)
Access Point
(Repeater)
66000
Wired LAN
To Next Page
Loading...
Need help?
General
