Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP User Manual

Chapter 4 Security Setup
Setting Up MAC-Based Authentication
4-28
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Setting Up MAC-Based Authentication
MAC-based authentication allows only client devices with specified MAC
addresses to associate and pass data through the access point. Client devices with
MAC addresses not in a list of allowed MAC addresses are not allowed to
associate with the access point.You can create a list of allowed MAC addresses in
the access point management system and on a server used for MAC-based
authentication.
This section provides instructions for:
• Enabling MAC-Based Authentication on the Access Point
• Enabling MAC-Based Authentication in Cisco Secure ACS
Enabling MAC-Based Authentication on the Access Point
Follow these steps to set up and enable MAC-based authentication on the access
point:
Step 1 Follow this link path to reach the Address Filters page:
a. On the Summary Status page, click Setup.
b. On the Setup page, click Address Filters under Associations.
Figure 4-10 shows the Address Filters page.

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Specifications

General

Brand	Cisco
Model	AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP
Category	Wireless Access Point
Language	English