3-19
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 3 Configuration
Radio Configuration
Figure 3-10 The AP Radio Identification Page
Follow this link path to reach the AP Radio Identification page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Identification in the AP Radio row under Network
Ports.
Settings on the AP Radio Identification Page
The AP Radio Identification page contains the following settings:
• Primary Port Settings
• Default IP Address
• Default IP Subnet Mask
• Service Set ID (SSID)
The page also displays the access point’s MAC address, the radio serial number,
the access point’s current IP address, its current IP subnet mask, its firmware
version, and its boot block version.