Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP User Manual

Chapter 3 Configuration
Ethernet Configuration
3-42
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Entering Advanced Configuration Information
You use the Ethernet Advanced page to assign special configuration settings for
the access point’s Ethernet port. Figure 3-18 shows the Ethernet Advanced page.
Figure 3-18 The Ethernet Advanced Page
Follow this link path to reach the Ethernet Advanced page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Advanced in the Ethernet row under Network Ports.
Settings on the Ethernet Advanced Page
The Ethernet Advanced page contains the following settings:
• Requested Status
• Packet Forwarding
• Default Unicast and Multicast Address Filters
• Maximum Multicast Packets/Second
Requested Status
This setting is useful for troubleshooting problems on your network. Up, the
default setting, enables the Ethernet port for normal operation. Down disables the
access point’s Ethernet port.

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Specifications

General

Brand	Cisco
Model	AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP
Category	Wireless Access Point
Language	English