Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP User Manual

5-5
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 5 Network Management
Using the Association Table
Information on Station Pages
Station Identification and Status
The yellow table at the top of the Station page lists the following information:
• System Name—The name assigned to the device.
• Device—The type and model number of the device.
• MAC Address—A unique identifier assigned by the manufacturer.
• IP Address—The device’s IP address.
When you click the IP address link, the browser attempts to display the
device’s home page. Cisco Aironet access points, bridges, and workgroup
bridges have browser-based interfaces, and many servers and printers have
them also.
• State—Displays the operational state of the wireless station. Possible states
include:
– Assoc—The station is associated with an access point. Client stations
associated with this access point will also show an Association Identifier
(AID) value that is an index into a table of stations associated with this
access point. Maximum AID count is 2007.
– Unauth—The station is not authenticated with any access point.
– Auth—The station is authenticated with an access point.
– Local Auth—The station has authenticated at least once with this access
point.
• Class—This field displays the type of station. Station types include:
– AP—An access point.
– Client, PS Client—A client or power-save client station.
– Bridge, Bridge R—A bridge or a root bridge.
– Rptr—A repeater.
– Mcast—A multicast address.
– Infra—An infrastructure node, typically a workstation with a wired
connection to the Ethernet network.

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Specifications

General

Brand	Cisco
Model	AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP
Category	Wireless Access Point
Language	English