Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP User Manual

Chapter 3 Configuration
Ethernet Configuration
3-38
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
• Ethernet Advanced—Contains settings for the operational status of the access
point’s Ethernet port. You can also use this page to make temporary changes
in port status to help with troubleshooting network problems.
• Ethernet Port—Lists key information on the access point’s Ethernet port.
Entering Identity Information
You use the Ethernet Identification page to enter basic locating and identity
information for the access point’s Ethernet port. Figure 3-16 shows the Ethernet
Identification page.
Figure 3-16 The Ethernet Identification Page
Follow this link path to reach the Ethernet Identification page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Identification in the Ethernet row under Network
Ports.
Settings on the Ethernet Identification Page
The Ethernet Identification page contains the following settings:
• Primary Port Settings
• Default IP Address

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Specifications

General

Brand	Cisco
Model	AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP
Category	Wireless Access Point
Language	English