9-29
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 9 Diagnostics and Troubleshooting
Using Command-Line Diagnostics
• avg block—the average block size; simply put, the number in the bytes
column divided by the number in the blocks column
• max block—the maximum contiguous memory block available
Follow the steps in the “Entering Diagnostic Commands” section on page 9-20 to
open the CLI and enter the :vxdiag_memshow command.
:vxdiag_muxshow
Use the :vxdiag_muxshow command to display all the networking protocols
installed on the access point. The list of installed protocols might look like the
following example:
Device: emac Unit: 0
Description: PPC405GP Ethernet Media Access Controller Enhanced Network Driver
Protocol: AWC Packet Router Type: 257 Recv 0x5ad0c Shutdown 0x5fbd0
Protocol: Cisco Discovery Protocol (CDP) Type: 8192 Recv 0x4f2c0
Shutdown 0x0
Protocol: AWC DDP Protocol Type: 34605 Recv 0x6986c Shutdown 0x6a728
Protocol: IP 4.4 ARP Type: 2054 Recv 0x2732c Shutdown 0x275ec
Protocol: IP 4.4 TCP/IP Type: 2048 Recv 0x2732c Shutdown 0x27524
Device: awc Unit: 0
Description: Aironet A504-Family Enhanced Network Driver
Protocol: AWC DDP Protocol Type: 34605 Recv 0x6986c Shutdown 0x6a728
Protocol: 802.1X Protocol Type: 34958 Recv 0x9adc4 Shutdown 0x9e5a0
Protocol: AWC WNMP MAC-Level Control Type: 34689 Recv 0x118af4 Shutdown
0x118e9c
Protocol: AWC 802.11 MAC-Level Control Type: 57841 Recv 0x6c258 Shutdown
0x6c5dc
Protocol: AWC 802.11 MAC-Level Management Type: 57840 Recv 0x6abf0
Shutdown 0x6c580
Protocol: AWC Packet Router Type: 511 Recv 0x5ad0c Shutdown 0x5fbd0
Device: rptr Unit: 1
Description: Aironet 802.11 Bridge Driver
Protocol: AWC Packet Router Type: 257 Recv 0x5ad0c Shutdown 0x5fbd0
Protocol: AWC DDP Protocol Type: 34605 Recv 0x6986c Shutdown 0x6a728
Device: rptr Unit: 2
Follow the steps in the “Entering Diagnostic Commands” section on page 9-20 to
open the CLI and enter the :vxdiag_muxshow command.
To Next Page
Loading...
Need help?
General
