Coastcom D/I Mux III System User Manual

D/I Mux III User’s Manual Appendix H. Set Report Options
265
Appendix H. SET REPORT OPTIONS
The Set report Options (SO) command allows viewing and selection of various communications modes
and devices. This appendix depicts and describes SO command screens for Feature Groups 6.4
through 9.0. Minor screen or command differences for Feature Groups prior to 6.4 are noted in the text
accompanying the figures.
The figures in this Appendix depict various configurable report options available through use of the SO
command screens. After typing SO, and [Enter], the current operating mode appears, followed by
communications configuration selection options. The options include the following.
• COMM mode: Selects the desired communications mode; options are either basic terminal control,
or Machine Machine Language (MML) control when Coastcom’s Network Communications Controller
(NCC) software product is used.
• Display Modem/Port expander configuration: Displays the current modem and port expander set
up.
• Change Modem Configuration: Allows connection to a modem, and use of the modem for control
and alarm reporting.
• Change Port Expander Configuration: Allows control and alarm reporting through a port expander
connection. Port expanders are useful when there are several network elements at one site; they
allow all of the devices connected to the port expander to share one control channel.
• Quit: Allows exiting the command screen at this time.

Coastcom D/I Mux III System Specifications

General

Brand	Coastcom
Model	D/I Mux III System
Category	Multiplexer
Language	English