Coastcom D/I Mux III System User Manual

Specifications
Multiplexer Requirement
Model: D/I Mux III
Software Versions:
Common Control Unit (CCU) (30305-106/108): 8.1/9.1 (or above)
Previous CCU Feature Group: 6.0/8.0 (or above)
Common Control Unit (CCU) (30305-110) 1.8 (or above)
ALPS CCU (30305-109) 9.8 (or above)
Multiplexer Control Unit (MCU) (40305-103) 1.4 (or above)
Previous MCU Feature Group: 1.3 (or above)
Advanced Multiplexer Control Unit (AMCU) (40305-104) 1.8 (or above)
Line Interface Units Requirement
LIU Models: 30309-104/114
Design Compliance
Complies with applicable sections of AT&T publications 43801, 54018, 54075, 62310 and 62411
Complies with applicable sections of ANSI publications T1.403, and T1.107
Complies with regulatory standards:
FCC Part 15, Subpart B, Class A;
FCC Part 68
DOC CS-03
UL/CSA standards certified by CSA
Copyright
©
1997 by Coastcom. All Rights Reserved. Printed in the United States of America. No Coastcom
document, or parts thereof, may be reproduced in any form without prior written permission from Coastcom except
where otherwise noted. The information in this manual is subject to change without notice. D/I Mux III, ALPS, and
T1M CSU/DSU are Trademarks of Coastcom
®
.
ACCUNET
®
and MEGACOM
®
are registered Trademarks of AT&T.

Coastcom D/I Mux III System Specifications

General

Brand	Coastcom
Model	D/I Mux III System
Category	Multiplexer
Language	English