Coastcom D/I Mux III System User Manual

D/I Mux III User’s Manual Appendix I. Traps and Modem Dial Out Configuration
286
Appendix I. Traps and Modem Dial Out Configuration
AMCU New Screens
Three new commands are now available on the AMCU. Two commands (Modify Dial Out Parameters, and View
Dial Out parameters) are for viewing and/or modifying the Modem Dialout Parameters. The other command
(Modify Alarm Trap) is used to determine what type of alarm conditions will be used to determine if a link is
down.
AMCU Main Menu
The new AMCU Main Menu with Modem Dial Out Configuration commands
08:50:32 ---------------------[ AMCU Main Menu ]---------------------- 06/11/97
LOCAL PARAMETERS NETWORK PARAMETERS
VR View Revision Levels VN View Network Parameters
MT Modify Keyboard Timeout MG Modify Default Gateway
MI Modify IP Address
MODEM DIALOUT CONFIGURATION MS Modify Subnet Mask
VD View Dial Out Parameters ML Modify SLIP Parameters
MD Modify Dial Out Parameters
MA Modify Alarm trap
D/I Mux III User Screen CODE DOWNLOAD
AC Access CCU User Submenu MC Download CCU Program
PASSWORDS SNMP MANAGER CONFIGURATION
VP View Passwords VM View Managers
MP Modify/Install Password MM Modify/Install Manager
RP Remove Password RM Remove Manager
Q Quit/Disconnect
------------------------------------------------------------------------------
Figure J-1 AMCU Main Menu

Coastcom D/I Mux III System Specifications

General

Brand	Coastcom
Model	D/I Mux III System
Category	Multiplexer
Language	English