92 PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring a TACACS/TACACS+ server
4
Configuring a management system log
Select Configure > System > Management > System Log to configure a system log. Click Apply to
save the configuration or click Reset to undo changes.
FIGURE 73 Configuring a system log
The System Log display contains the following information.
System Log Allows you to modify the system log.
Community String Allows you to modify.
Trap Allows you to configure the Trap.
Trap Receiver Allows you to configure the Trap Receiver.
Logging The state (enabled or disabled) of the Syslog buffer.
Logging persistence Allows you to enable or disable Logging persistence.
Buffer size The number of messages.
Facility Displays the list of facilities available.
Accept Severity Displays the severity levels.
To Next Page
Loading...
Need help?
General