80 PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring a RADIUS server
4
FIGURE 61 NTP server information
The NTP display contains the following information.
Configuring a RADIUS server
Select Configure > System > RADIUS to configure a RADIUS server. Click Apply to save your
configuration or click Reset. to undo changes.
IP Address The IP Address of the route’s destination.
Version Displays the version of the NTP Server.
Add Allows you to add the IP Address.
Delete Allows you to delete the changes made.
Reset To undo your changes, click Reset.
Show Displays the NTP Server entries.
To Next Page
Loading...
Need help?
General