82 PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring a TACACS/TACACS+ server
4
FIGURE 63 RADIUS server information
The RADIUS Server display contains the following information.
Configuring a TACACS/TACACS+ server
Select Configure > System > Tacacs to configure a TACACS server. Click Apply to save your
configuration or click Reset to undo changes.
IP Address The IP Address of the route’s destination.
Auth Port This parameter specifies the Authentication port number. It is an optional parameter. The
default is 1645.
Acct Port This parameter specifies the Accounting port number. It is an optional parameter. The
default is 1646.
Usage Enables the server to be used in any of the four modes:
• Authentication-only
• Authorization-only
• Accounting-only
• Any AAA operation
Add Allows you to add the IP Address.
Delete Allows you to delete the changes made.
Reset To undo your changes, click Reset.
Show Displays the RADIUS server entries.
To Next Page
Loading...
Need help?
General