PowerConnect B-Series FCX Web Management Interface User Guide 89
53-1002268-01
Configuring a TACACS/TACACS+ server
4
Configuring an SNMP community string
Select Configure > System > Management > Community String to configure an SNMP community
string.
FIGURE 70 Configuring an SNMP community string
The SNMP Community String display contains the following information.
Click Add to view the current configured SNMP Community String, as shown in Figure 71.
Type Displays the type of login username and password.
Community String Displays the username to open a web management session.
Encrypt Specifies if encryption is enabled for a particular string.
View Name Specifies the name of the community string.
ACL Id This parameter identifies a collection of individual ACL entries.
Delete Enables you to delete the community string.
Add Community String Allows you to add a new community string.
To Next Page
Loading...
Need help?
General