PowerConnect B-Series FCX Web Management Interface User Guide 101
53-1002268-01
Configuring an Ethernet port
4
Configuring an Ethernet port
Select Configure > Port > Ethernet to configure an Ethernet port. The Ethernet Port Configuration
window appears.
1. Select Stack Unit ID and Click Display to view the port details.
2. Click Modify to modify a respective port. For more information on how to modify an ethernet
port, refer to “Modifying port settings” on page 104 for details.
Port Statistic Displays the port statistic polling time.
STP Shows whether STP is Enabled or Disabled for the port.
TFTP Status Displays the current TFTP polling time status in secs.
RMON Displays the polling time for Remote Monitoring.
To Next Page
Loading...
Need help?
General