Chapter 2 InstallationASDA-A2R Series
2-2 Revision December, 2014
2.3 Ambient Conditions of Installation
The best temperature of this servo drive is between 0 ℃ and 55 ℃. If the temperature is
over 45 ℃, please place the product in a well-ventilated environment so as to ensure its
reliability performance. If the product is installed in an electric box, make sure the size of
the electric box and its ventilation condition will not overheat and endanger the internal
electronic device. Also, pay attention to the vibration of the machine. Check if the vibration
will influence the electronic device of the electric box. Besides, the ambient conditions
should also include:
Location has no over-heat device.
Location has no water drop, vapor, dust and oily dust.
Location has no corrosive and inflammable gas and liquid.
Location has no airborne dust and metal particles.
Location has solid foundation and no vibration.
Location has no interference of electromagnetic noise.
The ambient temperature of the motor is between 0℃ and 40℃ and the ambient conditions
include:
Location has no over-heat device.
Location has not water drop, vapor, dust and oily dust.
Location has no corrosive and inflammable gas and liquid.
Location has no airborne dust and metal particles.
To Next Page
Loading...
Need help?
General
