Digi XBee3 XB3M1 User Manual

AT commands Remote Manager commands
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
202
Remote Manager commands
The following commands are used with Remote Manager.
DF (Remote Manager Status Check Interval)
Defines the number of minutes between polls for Remote Manager activity.
Parameter range
N/A
Default
1440
EQ (Remote Manager FQDN)
Sets or display the fully qualified domain name of the Remote Manager server.
Note For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Range
From 0 through 63 ASCII characters.
Default
my.devicecloud.com
K1 (Remote Manager Server Send Keepalive)
Specify the Remote Manager Server Send Transmit Keepalive Interval value in seconds. The XBee
device considers a Remote Manager connection to have failed after 3 missed keepalives.
This command works with the K2 command to limit data usage. See Configure Remote Manager
keepalive interval.
Note Changing this value causes any currently active Remote Manager connections to be closed and
recreated.
Parameter range
10 - 7200 (x 1 s)
Default
75
K2 (Remote Manager Device Send Keepalive)
Specify the Remote Manager Device Send Transmit Keepalive Interval value in seconds. The Remote
Manager considers a connection to have failed after 3 missed keepalives.
This command works with the K1 command to limit data usage. See Configure Remote Manager
keepalive interval.

Digi XBee3 XB3M1 Specifications

General

Brand	Digi
Model	XBee3 XB3M1
Category	Modem
Language	English