XBee connection examples
The following examples provide some additional scenarios you can try to get familiar with the XBee
Smart Modem. These examples are focused on inter-operating with a host processor to drive the
XBee.
If you are interested in using the intelligence built into the XBee, see Get started with MicroPython.
Note Some carriers restrict your internet access. If access is restricted, running some of these
examples may not be possible. Check with your carrier provider to determine whether internet access
is restricted.
Connect to the Echo server 42
Connect to the ELIZA server 44
Connect to the Daytime server 46
Perform a (GET) HTTP request 48
Get started with CoAP 50
Connect to a TCP/IP address 54
Get started with MQTT 55
Debugging 63
Software libraries 63
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
41
To Next Page
Loading...
Need help?
General
