Get started with Digi Remote Manager Manage data in Remote Manager
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
94
Example: use the device's .gbl firmware image to update the XBee firmware
synchronously
To update the XBee firmware synchronously with Python 3.0, but using the device firmware image
already uploaded to Remote Manager, upload the device's *.gbl firmware to Remote Manager:
1. Download the updated firmware file for your device from Digi's support site. This is a zip file
containing .gbl and .mxi files for import.
2. Unzip the file and locate the .gbl file inside the unzipped directory.
3. Log in to Remote Manager.
4. Click the Data Services tab.
5. Click Data Files.
6. Click Upload Files; browse and select the *.gbl firmware file to upload it.
7. Send an HTTP SCI request to Remote manager with the path of the .gbl file; see the example
below.
import base64
import requests
# Location of firmware image on Remote Manager
firmware_path = '~/XBXC.gbl'
# Remote Manager device ID of the device being updated
device_id = '00010000-00000000-03526130-70153378'
# Remote Manager username and password
username = "my_remote_manager_username"
password = "my_remote_manager_password"
url = 'https://remotemanager.digi.com/ws/sci'
# Form update_firmware request
data = """
<sci_request version="1.0">
<update_firmware filename="firmware.gbl">
<targets>
<device id="{}"/>
</targets>
<file>{}</file>
</update_firmware>
</sci_request>
""".format(device_id, firmware_path)
# Post request
r = requests.post(url, auth=(username, password), data=data)
if (r.status_code != 200) or ("error" in r.content.decode('utf-8')):
print("firmware update failed")
else:
print("firmware update success")
Manage secure files in Remote Manager
You can interact with files on the XBee device from Remote Manager, using either the SCI (Server
command interface) or in the File Management view.
To Next Page
Loading...
Need help?
General
