Get started with Digi Remote Manager Create a Remote Manager account and add devices
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
78
1. Create a Remote Manager account.
2. Add an XBee Smart Modem to Remote Manager.
3. Verify the connection between a device and Remote Manager
Create a Remote Manager account
Digi Remote Manager is an on-demand service with no infrastructure requirements. Remote devices
and enterprise business applications connect to Remote Manager through standards-based web
services. This section describes how to configure and manage an XBee using Remote Manager. For
detailed information on using Remote Manager, refer to the Remote Manager User Guide, available via
the Documentation tab in Remote Manager.
Note Digi Remote Manager requires TCPand will not work with NB-IoT, unless the carrier supports
TCP.
Before you can manage an XBee with Remote Manager, you must create a Remote Manager account.
To create a Remote Manager account:
1. Go to https://www.digi.com/products/cloud/digi-remote-manager.
2. Click 30 DAYFREETRIAL/LOGIN.
3. Follow the online instructions to complete account registration. You can upgrade your
Developer account to a paid account at any time.
When you are ready to deploy multiple XBee Smart Modems in the field, upgrade your account to
access additional Remote Manager features.
Add an XBee Smart Modem to Remote Manager
Each XBee Smart Modem must be added to the Remote Manager account inventory list.
Before adding an XBee to your Remote Manager account inventory, you need to determine the
International Mobile Equipment Identity (IMEI) number for the device. Use XCTUto view the IMEI
number by querying the IM parameter.
Note Digi Remote Manager requires TCPand will not work with NB-IoT, unless the carrier supports
TCP.
To add an XBee to your Remote Manager account inventory, follow these steps:
1. Log into Remote Manager.
2. Click Device Management > Devices.
3. Click Add Devices. The Add Devices dialog appears.
4. Select IMEI#, and type or paste the IMEI number of the XBee you want to add. The IM
(IMEI)command provides this number.
To Next Page
Loading...
Need help?
General
