AT commands System commands
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
205
System commands
The following commands are used to assign descriptors to the XBee Smart Modem, which distinguish
the devices from each other in Remote Manager.
KL (Device Location)
Sets or displays a user-defined physical location for the XBee displayed in Remote Manager.
Range
Up to 20 ASCII characters
Default
One ASCII space character (0x20).
KP (Device Description)
Sets or displays a user-defined description for the XBee displayed in Remote Manager.
Range
Up to 20 ASCII characters
Default
One ASCII space character (0x20)
KC (Contact Information)
Sets or displays user-defined contact information for the XBee displayed in Remote Manager.
Range
Up to 20 ASCII characters
Default
One ASCII space character (0x20).
To Next Page
Loading...
Need help?
General
