Packaged firmware updates FW Update - 0x2B
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
235
FW Update - 0x2B
Description
Use this frame to send Cellular component firmware updates.
Format
The following table provides the contents of the frame.
Frame
data fields Offset Type Description
ID 1 uint8 Will be matched in response. Typically starts at 0, but may start at any
number and it must increment with each successive frame (modulo
256).
Component
identifier
2 uint8 Set to zero, may be used in the future to identify the target
component.
Flags 3 uint8 Bit mask of values indicating various status:
bit 0 (0x01) - Initial request.
bit 1 (0x02) - Final request (File fully transferred).
bit 2 (0x04) - Cancel request (Used to abort an update in progress).
Payload
4 multi-
byte
Next section of file being transferred.
FW Update Response - 0xAB
Description
This frame is read from the module and it provides the status for each 0x2B frame sent.
Format
The following table provides the contents of the frame.
Frame data fields Offset Type Description
ID 1 uint8 Value from request payload.
To Next Page
Loading...
Need help?
General
