OPERATION
3-70 EPT024619 Issue 1 June 2016
UPDATE AND CREATE STRINGS
Note: A wireless USB keyboard is required for this procedure.
A string, is a string of text which can be saved to the G20i and made
available to insert into message designs using the wireless USB keyboard.
Up to 5 strings with a maximum of 50 characters can be saved.
To insert a string into a message design: See “String” on page 3-29.
To create and update the saved strings on the G20i:
(1) Using the wireless USB keyboard, from the printer’s main menu,
move the cursor down to highlight Settings.
(2) Press the Enter button.
(3) Move the cursor down to highlight String.
(4) Press the Enter button.
(5) A window will open in which 5 lines of text can be input. Each line
represents a different string. Move the cursor to the string that
requires updating.
(6) Use the Backspace button to delete the string data.
(7) Use the keyboard to enter new string data.
(8) Press the Enter button.
(9) Press the ESC button to return to the printer’s main menu.
To Next Page
Loading...
Need help?
General
