Ducati 999 User Manual

31
E
Adjusting the gear change and rear brake pegs
Note
The position of the gear change and rear brake
pedals may be changed by using different combinations
of the upper (A and B) and lower (C, D, E, F and G)
mounting holes to secure the footpeg brackets. The
figure shows gear change footpeg adjustment. The rear
brake footpeg is adjusted by the same procedure.
Warning
Gear change and rear brake footpegs are critical
safety components. Have them adjusted at an Authorized
DUCATI Workshop.
A
B
D
C
E
F
G
fig. 25

Ducati 999 Specifications

General

Compression Ratio	11.4:1
Transmission	6-speed
Fuel Tank Capacity	15.5 l (4.1 US gal)
Rear Suspension	Progressive linkage with fully adjustable Showa monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Rear Brakes	240 mm disc, 2-piston caliper
Tire Front	120/70 ZR 17
Tire Rear	190/50 ZR 17
Engine Type	L-Twin cylinder, 4 valves per cylinder Desmodromic
Bore x Stroke	100 mm x 63.5 mm
Power	104 kW (141 hp) @ 9750 rpm
Torque	110 Nm (81.4 lb-ft) @ 8000 rpm
Front Suspension	Showa 43 mm upside-down fork, fully adjustable