Ducati 999 User Manual

88
E
Type:
34-4 pistons.
Friction material:
TOSHIBA TT 2172
Master cylinder type:
PR 18.
Rear brake (999/999S)
With fixed drilled steel disc.
Disc diameter:
240 mm
Hydraulically operated by a pedal on R.H. side.
Braking surface:
32 sq cm
Make:
BREMBO
Type:
34-2 pistons.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.
Performance data
Maximum speed in any gear should be reached only after
a correct running-in period with the motorcycle properly
serviced at the recommended intervals.
Max. speed (rider alone):
265 Km/h (999)
270 Km/h (999S)
Spark plugs
Make:
CHAMPION
Type:
RG 4 HC (999/999S)
Brakes
Front brake (999/999S)
With double semi-floating drilled disc.
Material:
steel
Disc diameter:
320 mm
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
79 sq cm
Make brake calipers:
BREMBO

Ducati 999 Specifications

General

Compression Ratio	11.4:1
Transmission	6-speed
Fuel Tank Capacity	15.5 l (4.1 US gal)
Rear Suspension	Progressive linkage with fully adjustable Showa monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Rear Brakes	240 mm disc, 2-piston caliper
Tire Front	120/70 ZR 17
Tire Rear	190/50 ZR 17
Engine Type	L-Twin cylinder, 4 valves per cylinder Desmodromic
Bore x Stroke	100 mm x 63.5 mm
Power	104 kW (141 hp) @ 9750 rpm
Torque	110 Nm (81.4 lb-ft) @ 8000 rpm
Front Suspension	Showa 43 mm upside-down fork, fully adjustable