Ducati 999 User Manual

74
E
Front turn indicators (fig. 69)
Note
The rear-view mirror and incorporated turn indicator
are shown detached from the headlamp fairing to
simplify illustration.
Remove the screws (1) and detach the glass (2) from the
indicator/mirror support.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks.
Refit the glass into the suitable slot in the indicator body
and tighten the screws (1).
Rear turn indicators (fig. 70)
To change the rear turn indicator bulbs, rotate indicator
body (3) by one fourth of a turn so that glass is upward
and extract it from indicator mount.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks.
Refit indicator body (3) to its mount and rotate by one
fourth of a turn.
1
2
fig. 69
3
fig. 70

Ducati 999 Specifications

General

Compression Ratio	11.4:1
Transmission	6-speed
Fuel Tank Capacity	15.5 l (4.1 US gal)
Rear Suspension	Progressive linkage with fully adjustable Showa monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Rear Brakes	240 mm disc, 2-piston caliper
Tire Front	120/70 ZR 17
Tire Rear	190/50 ZR 17
Engine Type	L-Twin cylinder, 4 valves per cylinder Desmodromic
Bore x Stroke	100 mm x 63.5 mm
Power	104 kW (141 hp) @ 9750 rpm
Torque	110 Nm (81.4 lb-ft) @ 8000 rpm
Front Suspension	Showa 43 mm upside-down fork, fully adjustable