Ducati 999 User Manual

75
E
Stop light (fig. 71)
To replace the stop and parking light bulbs, unscrew the
two screws (1) that secure the cover (2). The cover (2)
has two retaining pins on the inner face that hold the tail
light lens (3) in place. The bulb is of the bayonet-type:
press and twist anti-clockwise to remove. Fit the spare
bulb by pressing and turning clockwise until it locates
into its seat with an audible click. Refit any parts you
have removed.
Number plate light (fig. 72)
To expose the number plate light bulb, unscrew the two
retaining screws (4) securing the cover (5). Extract the
bulb and replace.
3
2
5
1
4
fig. 71
3
fig. 72

Ducati 999 Specifications

General

Compression Ratio	11.4:1
Transmission	6-speed
Fuel Tank Capacity	15.5 l (4.1 US gal)
Rear Suspension	Progressive linkage with fully adjustable Showa monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Rear Brakes	240 mm disc, 2-piston caliper
Tire Front	120/70 ZR 17
Tire Rear	190/50 ZR 17
Engine Type	L-Twin cylinder, 4 valves per cylinder Desmodromic
Bore x Stroke	100 mm x 63.5 mm
Power	104 kW (141 hp) @ 9750 rpm
Torque	110 Nm (81.4 lb-ft) @ 8000 rpm
Front Suspension	Showa 43 mm upside-down fork, fully adjustable